HLF

Thought I'd share my process of making it



Got this aluminum hangers from a Home Depot shop. Each rod has 2 blunt hooks, one small one large. Bought a total of 3. The one on the left already has had some sharpening done.



Workbench clamp + metal file! Each hanger took about 45 minutes to be fully sharpened.



3 rods finally sharpened!
Hammered the smaller blunt hooks on the top, added some cable ties. Tied a swivel to attach weight!


Final product!
Old floats to cover sharp hooks



Saved myself some bucks and quite satisfying to make your own equipment!

Haven't had it tested but I'll be sure to real soon with a biggie

That's pretty innovative work there, and that's a lot of patience you have to file those hangers. I hope you get to try it soon, good luck!